Elevator Sump System
The EleVader® is a product that automatically removes oily water from elevator pits. Building codes require the automatic removal of all liquids from elevator shafts. Elevators are susceptible to failure during an emergency due to the water-filled shafts. Oily water must be pretreated before being discharged to the public sewer. The EleVader® is a complete solution to pump, pretreat, and automatically monitor liquid levels in the elevator shaft.Read More
The ParkUSA® Helicepter® is a fuel-water separator for use on heliports. In the event of a helicopter accident or fuel spillage, the separator will separate and retain flammable fuel from stormwater.
Special consideration should be made for heliports (also referred to as a helistop, helipad, or helideck) located on elevated structures or building rooftops. These applications have rooftop stormwater drainage systems that run down within the building or marine structure.
ParkUSA® GreaseTrooper® is a gravity interceptor designed to reduce the amount of FOG (fats, oils, and greases) in wastewater. Grease interceptors are used in establishments to remove excessive amounts of grease that may interfere with the proper drainage and treatment of wastewater. Even if accumulated FOG do not escalate into blockages and sanitary sewer overflows (SSO), they will disrupt wastewater treatment operations and increase costs. Most local plumbing codes prohibit any industrial user from discharging FOG over 100 mg/l into the public sewer system.
The StormTrooper® is the most advanced stormwater hydrodynamic separator (HDS) on the market. The StormTrooper® utilizes patented technology to remove sediments, trash, and oil from stormwater runoff. With thousands of installations worldwide, engineers rely on and include the StormTrooper® in their Stormwater Water Quality (SWQ) plan as required by EPA Clean Water Act. Stormwater runoff from urban areas carries pollutants and trash into the storm drainage system. Unlike sanitary sewer water, stormwater typically receives little treatment.
Water Meter Assembly
The ParkUSA Water Meter Assembly is a product designed to monitor and measure water usage. Clean water is a valuable resource to which Americans have become dependent for all aspects of personal, recreation, and business activities. The water originates from either below ground or surface water sources. Water utilities process and distribute the water via underground water mains. Utility companies charge customers for their water usage. To monitor and meter water usage, water meters are used to record this information.
Water Storage Tanks
The ParkUSA® BreakTank® is a packaged water storage system complete with tank, controls, and fill valves. A BreakTank is a necessary component in multilevel buildings to provide adequate water needs for Fire, Domestic, & Irrigation applications. ParkUSA has fabricated BreakTanks for more than 25 years in accordance with the American Welding Society Specifications, AISC, NFPA, and the Uniform Building Code.